|
Vintage Style Cornice
You will need: Fabric 56 (62) (84) x 18
56 (62) (84) x 12
Tassel Trim 56 (62) (84)
Option: Beaded shawl or other accentTo Assemble:
Step 1: Lay material face down, center the polyester fiber fill starting at the top pull fabric over edge and over the channel, tuck the fabric in the channel using the long friction foam rope to secure. Turn cornice around and do the other long side using the same method. Tuck in the short ends of the cornice using the shorter friction foam rope pieces in the same manner. Neatly fold the corners in, as you would do wrapping a package, on the bottoms and tops of the side panels of the cornice securing with the remaining friction foam rope pieces.
Step 2: Secure the tassel trim on the front bottom edge of the cornice either with strips of peal and stick velcro, iron on fusion tape, with a glue gun or even hand whip stitched into place.
Step 3: With cornice upright and facing you, drape the
beaded shawl or some other accent over the corner. If you wish you can secure it by pulling the friction foam rope from the edges, secure your accent piece with the friction foam rope.You have just created your own beautiful, elegant cornice easily and in less than a half an hour!
If you dont think the fabric covering the cornice is tight enough, just gently pull a section of the friction foam rope out, pull fabric a little tighter and replace the friction foam rope. You can change the whole look of your room by using different fabrics, adornments, trims or create a whole different style and all using the same cornice over again.
